Electrical BOS / preliminary hybrid scope

Map interfaces before material selection.

Map PV, inverter, battery and AC/DC interfaces before engineering review.

Live calculation · retained project context · engineer review

Electrical BOS / preliminary hybrid scope

Hybrid System Configurator

Map the PV, inverter, battery and AC/DC interface boundaries before the project BOM is prepared for engineering review.

BlockedEngine 1.1.0

01 PV & inverter02 Battery scope03 Isolation concept04 Review package

Architecture outcome

Configuration blocked

DC / AC1.20Battery rate0.47 CPV capacity120 kWBattery215 kWh

Engineer review

1.20 0.80–1.50 preliminary envelope

Next: Confirm clipping, inverter overload allowance and target operating strategy with the project engineer.

Engineer review

0.47 C ≤ 1.20 C preliminary envelope

Next: Confirm the actual battery manufacturer's continuous and peak power limits.

Engineer review

1000 Vdc 600–1500 Vdc tool envelope

Next: Use an approved equipment architecture outside this preliminary voltage envelope.

Blocked

Not defined Required for hybrid transfer scope

Next: Define backed-up loads, changeover behavior and essential-circuit boundary.

Blocked

Not defined Required before technical RFQ

Next: Confirm emergency stop, isolation and interlock concept for the complete system.

Engineer review

Qty 1 — 120 kW PV ÷ 120 kW preliminary feeder group

Review: Coordinate with string, combiner and DC protection snapshots.

Engineer review

Qty 1 — One preliminary project control boundary

Review: Confirm PCS / BMS / EMS interfaces, I/O list and enclosure environment.

Engineer review

Qty 1 — 100 kW inverter AC interface

Review: Confirm fault level, protective devices, grid code and utility interface.

Engineer review

Qty 1 — 215 kWh / 100 kW battery boundary

Review: Confirm battery manufacturer's ratings and emergency isolation sequence.