Menu
Reviewed configuration
NX08 PV waterproof module enclosure
A N/A configuration with 8 input and - output boundary. Confirm the project specification before release.

Source-backed technical data
Complete configuration parameters, not only a model summary.
The table below is transcribed from the approved catalogue technical sheet for this configuration. The final drawing, BOM and inspection scope remain subject to the agreed project specification.
Configuration summary
| Model | NX08 |
|---|---|
| Configuration type | PV waterproof module enclosure |
| Voltage class | N/A |
| Input count | 8 |
| Output count | - |
| Protection / switching architecture | DIN module enclosure |
Technical specifications
| Protection class | IP 65 |
|---|---|
| Insulation | Class II |
| Material | polycarbonate/ABS |
| Shock resistance | IK10 |
| Protection against chemicals and weather conditions | Water, saline solutions, acids, basics, mineral oils, UV rays |
| Operating temperature | -25°C ~ +100°C |
| Nominal insulation voltage | 1000V AC~1500V DC |
| External dimensions (WxHxD) | 210x194x120mm |
| Module capacity | 08 Modules |
Technical context
Use the relevant selection guide before finalizing the scope.
Electrical enclosures / Standards guide
How to Choose the Right IP Rating for Your Application
An IP code has two independent digits: the first covers solids and access, while the second covers water. This guide explains the IEC 60529 test logic and how to specify a practical enclosure rating.
Read Insight →Low-voltage switchgear / Code guideLow Voltage Switchgear Code Guide: GGD, GCK, GCS, MNS and XL-21 Explained
Decode common low-voltage switchgear designations and compare fixed, withdrawable and modular assemblies by current, short-time withstand, serviceability and cost.
Read Insight →


